Brand NEW Diesel Generator For Sale

METCL diesel generator repair and maintenance service

I hope you enjoy reading this generator blog post.

If you need , click here.

Cummins 100kw diesel generator fuel consumption

Cummins 100kW diesel generator Fuel Consumption Chart

The Cummins 100kW diesel generator is powered by a Cummins engine 6BTA5.9-G2. It has a special enclosure to reduce noise in any weather, keeping it at 72db at a 7m distance. It also has a built-in fuel tank so you don't have to refuel often, using less than 30L/h of fuel consumption. An AVR guarantees stable power and has safety features like automatic shutdown for low oil levels or other problems.

POWER OUTPUT:

100.0KW (125KVA) STANDBY, 92.0KW (115KVA) PRIME, 3PHASE, 0.8PF, 50HZ

METCL Cummins engine 6BTA5.9-G2

 

Datasheet of Cummins 100kW Diesel Generator

  • Genset Supplier - METCL
  • Genset Model - C125GF/S
  • Generator Speed - 1500 RPM
  • Displacement - 5.9 Litre
  • Fuel Consumption at rated 92kW/115KVA Load- 30 Litre/h
  • Cummins Engine 6BTA5.9-G2, 130kW, 1500RPM, Turbocharged
  • Electronic Speed Governor
  • Radiator cooling system with fan guards and coolant drain extension with in-line valve
  • AC Alternator Producer - STAMFORD/Leroy-Somer/Mecc Alte
  • AC Alternator 4 Leads, brushless, 100% Copper Windings
  • Full load rated Power - 92kW/115kVA
  • 50 Hz. 1500RPM 3Phase AC400V
  • 3-Phase AC380/415/440V etc Multi-voltage as optional

Features of Cummins Engine 6BTA5.9-G2

Cummins engine 6BTA5.9-G2 is recognized for its performance, reliability, and durability worldwide. With its very high derating threshold for temperatures, altitudes, and humidity, the Cummins 6BTA5.9-G2 engine ranks among the top performers in the harshest operating environments.

Cummins 100kW diesel generator Fuel Consumption Chart

METCL China Cummins engine 6BTA5.9-G2 100KW DIESEL GENERATOR FUEL CONSUMPTION

 

GENERAL CUMMINS ENGINE 6BTA5.9-G2 DATA SHEET 

GENERAL ENGINE DATA

Approximate Engine Weight (wet)……………………………………………………….. -kg     453

Mass Moment of Inertia of Rotating Components (No Flywheel)…………-kg·m2    0.25

Center of Gravity from Rear Face of Block…………………………………………… -mm     391

Center of Gravity above Crankshaft Centerline………………………………………-mm     140

Engine Idle Speed………………………………………………………………………………-RPM  750-850

Fire Order………………………………………………………………………………………………… 1-5-3-6-2-4

ENGINE MOUNTING

Maximum (Static) Bending Moment at Rear Face oF Block………… ……….-N.m   1356

EXHAUST SYSTEM

Maximum Back Pressure……………………………………………………………………-kPa     10

AIT INTAKE SYSTEM

Maximum Intake Air Restriction with Heavy-Duty Air Cleaner

— Dirty Element……….…………………………………….…………………………………-kPa    6.2

— Clean Element……….…………………………….…………………………….………… -kPa     3.7

LUBRICATION SYSTEM

Engine Oil Pressure for Engine Protection Devices:

— Idle Speed(Minimum )……………………………………………………………………-kPa  207

— Governed Speed(Maximum)……………………………………………………………-kPa  345

Maximum Oil Temperature………………….…………………….…………………………-℃   121

Minimum Required Lube System Capacity - Sump plus Filters…….……….-litre  16.4

FUEL SYSTEM

Type Injection System………………………………………………………………BYC PB Direct Injection

Maximum Restriction at Lift Pump………...……………………………………………-kPa  13.6

Maximum Fuel Inlet Temperature..................................................................-℃   66.7

Total Drain Flow (constant for all loads)…………..………………………………-litre/hr  30

COOLING SYSTEM

Coolant Capacity - Engine Only……………………………………………………………-litre   10

Maximum Coolant Friction Head External to Engine……………………-1800rpm…..-kPa 35

-1500 rpm…  -kPa 28

Maximum Static Head of Coolant Above Engine Crank Centerline…………….-m        14

Standard Thermostat (Modulating) Range…………………………….………………-℃    82 - 95

Minimum Pressure Cap……………………………………………………………………...… -kPa    69

Maximum Top Tank Temperature for Standby / Prime Power…………….....…-℃    104/100

ELECTRICAL SYSTEM

Cranking Motor (Heavy Duty, Positive Engagement)………………………………-volt   24V   12V

Battery Charging System, Negative Ground………………………………………-ampere   40      63

Maximum Allowable Resistance of Cranking Circuit………………………………-ohm 0.002 0.00075

Minimum Recommended Battery Capacity

—Cold Soak @ 0 to 32-F (-18 to 0-C)………………………………………………….-0°F CCA 400 800

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact us