Cummins 100kW diesel generator Fuel Consumption Chart
The Cummins 100kW diesel generator is powered by a Cummins engine 6BTA5.9-G2. It has a special enclosure to reduce noise in any weather, keeping it at 72db at a 7m distance. It also has a built-in fuel tank so you don’t have to refuel often, using less than 30L/h of fuel consumption. An AVR guarantees stable power and has safety features like automatic shutdown for low oil levels or other problems.
POWER OUTPUT:
100.0KW (125KVA) STANDBY, 92.0KW (115KVA) PRIME, 3PHASE, 0.8PF, 50HZ
Datasheet of Cummins 100kW Diesel Generator
- Genset Supplier – METCL
- Genset Model – C125GF/S
- Generator Speed – 1500 RPM
- Displacement – 5.9 Litre
- Fuel Consumption at rated 92kW/115KVA Load- 30 Litre/h
- Cummins Engine 6BTA5.9-G2, 130kW, 1500RPM, Turbocharged
- Electronic Speed Governor
- Radiator cooling system with fan guards and coolant drain extension with in-line valve
- AC Alternator Producer – STAMFORD/Leroy-Somer/Mecc Alte
- AC Alternator 4 Leads, brushless, 100% Copper Windings
- Full load rated Power – 92kW/115kVA
- 50 Hz. 1500RPM 3Phase AC400V
- 3-Phase AC380/415/440V etc Multi-voltage as optional
Features of Cummins Engine 6BTA5.9-G2
Cummins engine 6BTA5.9-G2 is recognized for its performance, reliability, and durability worldwide. With its very high derating threshold for temperatures, altitudes, and humidity, the Cummins 6BTA5.9-G2 engine ranks among the top performers in the harshest operating environments.
Cummins 100kW diesel generator Fuel Consumption Chart
GENERAL CUMMINS ENGINE 6BTA5.9-G2 DATA SHEET
GENERAL ENGINE DATA
Approximate Engine Weight (wet)……………………………………………………….. -kg 453
Mass Moment of Inertia of Rotating Components (No Flywheel)…………-kg·m2 0.25
Center of Gravity from Rear Face of Block…………………………………………… -mm 391
Center of Gravity above Crankshaft Centerline………………………………………-mm 140
Engine Idle Speed………………………………………………………………………………-RPM 750-850
Fire Order………………………………………………………………………………………………… 1-5-3-6-2-4
ENGINE MOUNTING
Maximum (Static) Bending Moment at Rear Face oF Block………… ……….-N.m 1356
EXHAUST SYSTEM
Maximum Back Pressure……………………………………………………………………-kPa 10
AIT INTAKE SYSTEM
Maximum Intake Air Restriction with Heavy-Duty Air Cleaner
— Dirty Element……….…………………………………….…………………………………-kPa 6.2
— Clean Element……….…………………………….…………………………….………… -kPa 3.7
LUBRICATION SYSTEM
Engine Oil Pressure for Engine Protection Devices:
— Idle Speed(Minimum )……………………………………………………………………-kPa 207
— Governed Speed(Maximum)……………………………………………………………-kPa 345
Maximum Oil Temperature………………….…………………….…………………………-℃ 121
Minimum Required Lube System Capacity – Sump plus Filters…….……….-litre 16.4
FUEL SYSTEM
Type Injection System………………………………………………………………BYC PB Direct Injection
Maximum Restriction at Lift Pump………………………………………………………-kPa 13.6
Maximum Fuel Inlet Temperature…………………………………………………………-℃ 66.7
Total Drain Flow (constant for all loads)…………..………………………………-litre/hr 30
COOLING SYSTEM
Coolant Capacity – Engine Only……………………………………………………………-litre 10
Maximum Coolant Friction Head External to Engine……………………-1800rpm…..-kPa 35
-1500 rpm… -kPa 28
Maximum Static Head of Coolant Above Engine Crank Centerline…………….-m 14
Standard Thermostat (Modulating) Range…………………………….………………-℃ 82 – 95
Minimum Pressure Cap………………………………………………………………………… -kPa 69
Maximum Top Tank Temperature for Standby / Prime Power………………..…-℃ 104/100
ELECTRICAL SYSTEM
Cranking Motor (Heavy Duty, Positive Engagement)………………………………-volt 24V 12V
Battery Charging System, Negative Ground………………………………………-ampere 40 63
Maximum Allowable Resistance of Cranking Circuit………………………………-ohm 0.002 0.00075
Minimum Recommended Battery Capacity
—Cold Soak @ 0 to 32-F (-18 to 0-C)………………………………………………….-0°F CCA 400 800